Sentinel-6 PDAP

Sentinel-6/Jason-CS is an operational oceanography programme of two satellites that will ensure continuity to the Jason series of operational missions, allowing mapping out global sea surface levels with higher precision. The mission is being developed by a multi-Agency partnership consisting of ESA, EC through Copernicus programme, EUMETSAT, NASA-JPL, and NOAA.

The main payload of the Sentinel-6/Jason-CS satellite is the Poseidon-4 radar altimeter that has evolved from the altimeters on-board the Jason satellites (Poseidon-2 of Jason-1, Poseidon-3A of Jason-2, and Poseidon-3B of Jason-3); and also inherits the Synthetic Aperture Radar (SAR) Altimeter mode of CryoSat-2 SIRAL and Sentinel-3 SRAL now proven to reduce errors in elevation and SWH retrieval over ocean. Furthermore, Poseidon-4 will be the first radar altimeter embarked on a satellite that includes improved digital and radio frequency hardware and, in particular, open burst Ku-band pulse transmission (an operation currently termed the interleaved mode), that performs a near continuous transmission of Ku-band pulses, that will allow SAR and pulse limited data to be gathered simultaneously. As with the Jason series and Sentinel-3, the Poseidon-4 transmits C-band pulses in order to retrieve a correction for ionospheric path delay.

The Payload Data Acquisition and Processing (PDAP) component, which is part of the Sentinel-6 Overall Ground Segment (S6 OGS), will acquire data from the Sentinel-6/Jason-CS satellite and perform end-to-end processing. The development of the PDAP is funded by the EUMETSAT Jason-CS programme, the organisation’s contribution to the cooperative development of Copernicus Sentinel-6 (Jason-CS) mission. The first Sentinel-6/Jason-CS satellite (Sentinel-6A) is planned for launch at the end of 2020.

isardSAT is responsible for the development of the Altimeter Level-1 Product Generation Function (ALT L1 PGF), within the S6 Payload Data Acquisition and Processing (S6 PDAP) project, which will process the altimeter data to provide operational L1 products.

The project started in 2018, will develop the operational processors until 2020 for the launch of Sentinel-6, and will continue maintaining them until the end of the Senitnel-6 mission life time.


Exprivia, isardSAT, CLS




algorithm development, altimetry, satellites, instrumental calibration